Course Details

Use * for wildcards - e.g. ccna*,*switch

Cisco ONS 15454 Carrier Packet Transport (CPT2.0) 0

Following are the prerequisites for this course: œ Familiarity with the Cisco ONS 15454 family œ Knowledge of packet switching œ Knowledge of Ethernet basics To locate Cisco courses that cover the listed prerequisites, go to the Cisco Training & Events webpage at
Course Content
The Cisco® ONS 15454 Carrier Packet Transport Release 9.5.12 Version 1 instructor-led course offered by High-Touch Delivery Learning Services is a lab-intensive course that introduces you to the Cisco Carrier Packet Transport (CPT) network. You will learn about the M6 and M2 shelf hardware installation, power connections, and network connection. You will learn about the CPT 600, CPT 200, and CPT 50 Satellite. The course covers the four kinds of Ethernet virtual circuits (EVCs: Ethernet private line, Ethernet virtual private line, Ethernet private LAN, and Ethernet virtual private LAN). There is a section on how to install connections to an external router network and how to configure EVCs to it. You will learn how to set up the network for Multiprotocol Label Switching (MPLS) Transport Protocol (TP) and install MPLS-TP tunnels, Ethernet pseudowires and virtual private LAN services (VPLS), which are multipoint pseudowire. New to this version of the course are how constant bit-rate services, such as T1 and T3, are carried via EVC and pseudowire and how SyncE is configured in the CPT network. The last section covers integrated dense wavelength-division multiplexing (DWDM), where DWDM is configured in the same chassis with CPT.
Course Outline
The course outline is as follows: œ Module 1: CPT Hardware Fundamentals œ Module 2: CPT Software Fundamentals œ Module 3: Network Configuration Spans, PPCs and GCCs œ Module 4: Configuration for EVCs œ Module 5: Configuration for MPLS-TP œ Module 6: Installing MPLS-TP Tunnels and Pseudowires œ Module 7: Quality of Service for CPT œ Module 8: CPT Virtual Private LAN Service œ Module 9: CPT Router Interface œ Module 10: SyncE and Constant Bit-Rate Circuits œ Module 11: Embedded Dense Wavelength Division Multiplexing œ Module 12: Verifying Satellite License Information œ Module 13: Operations Administration and Maintenance œ Module 14: CPT Troubleshooting
Who Should Attend
This course is for technical professionals who are responsible for installation, deployment, and maintenance of the Cisco 15454 CPT network. Network operations, planners, and designers will also benefit.
  • Career Certifications

  • Technology

  • Delivery

  • Duration

     5  Days

Currently there are no scheduled offerings for this course.